Skip to content

Record to a USB disk

The encoder saves the program (what goes on air, with its audio) to a USB stick or disk, at a higher quality than the stream and apart from it: if the connection drops, the recording goes on. Use it as a backup of every stream or to record without streaming. It came with version 0.12.0: if you don’t see it, check Updating the encoder.

On the screen, Settings › Stream › Recording. On the web, the Recording card. Choose the mode:

Mode What it does
Off Nothing is recorded
Independent You start and stop it with REC, live or not
With the stream Go live also starts recording, and stopping the stream stops both. With REC you can also record without streaming

On the screen, REC sits to the right of Go live and is held for 1 s, like Go live. With With the stream and a disk ready, the go-live button says GO LIVE + RECORD. While recording, the header says REC 01:12:34 and how much room is left. On the web, the buttons are Record and Stop recording.

Quality Bitrate Takes
Standard 15 Mbps 6.8 GB/h
High (the default) 25 Mbps 11.4 GB/h
Maximum 40 Mbps 18.1 GB/h
Efficient (H.265) 20 Mbps 9.1 GB/h

The program is recorded as it goes out, at its resolution and frame rate, in an MP4 file that Premiere, DaVinci Resolve, Final Cut, QuickTime and VLC open. Efficient takes less room, but some older editors don’t open H.265. The quality can’t change while you record.

  • exFAT, FAT32 or ext4, 1 GB at least. On FAT32, recordings are split into 3.9 GB files, one after another, with no gap between them.
  • NTFS doesn’t work. The encoder can turn the disk into exFAT: Format, then Erase and format. Everything on it is erased, recordings included.
  • Before unplugging it, press Eject. You can’t eject or format while recording.

In the disk’s EnhancedIRL folder, one MP4 file per recording named with the date and time it started, for example 2026-10-24_1530.mp4. If the encoder doesn’t have the time set yet, they’re named rec-0042.mp4. To get them, eject the disk and plug it into a computer: they aren’t downloaded over the web.

If… This happens
The connection drops The stream retries on its own and the recording goes on without a gap
The disk fills up It warns you with less than 10 minutes left. When it’s full, it closes the file and stops: The disk filled up: the recording stopped
You unplug the disk while recording The stream isn’t touched. The recording stops and, if you didn’t stop it, goes on in a new file when you plug a disk back in
The disk can’t keep up It skips whole chunks so the file stays valid, and warns: the disk cannot keep up. Use a faster stick or a lower quality
The power goes When it’s back, the stream resumes if you were live, but the recording stays stopped and says so: Recording stopped because of a power cut. The file is repaired on its own when you plug that disk back in
There’s an update It isn’t installed while you record: stop recording first

If something doesn’t work, see Encoder problems.